WELCOME TO Tell Qi (Tianjin) International Trade Co., Ltd.

taper roller bearings

taper roller bearings
Author :Admin | Publish Date:2013-05-27 08:54:02
Tapered Roller Bearings, according to the row number of rollers, are defined as single row, double row and four row. The single row tapered roller bearings clearance should be adjusted when they are mounted. For double row and four row tapered roller bearings, the clearance can be provided when assembling them according to national standards, customers don't need to adjust it.

The tapered roller bearings mainly carry radial, axial combined load with radial load in the main. The capacity of axial load carrying depends on the contact angle of outer rings' raceway. The bigger the contact angle is, the greater the capacity will be.The bearings are mainly used in metallurgy, mining, rolling mills, automobiles, machines, plastics and other industries.

Combined cylindrical roller/tapered roller bearings, also referred to as "Kombi" bearings, have been developed by SKF. They comprise two single row cylindrical roller bearings and one double row tapered roller bearing, and support radial loads and axial loads separately. The outer cylindrical roller bearings have high load carrying capacity and are only subjected to radial loads. The cylindrical rollers are guided between two integral flanges on the inner ring, whilst the low flange on the inboard side of the outer ring serves to hold the bearing together until it is mounted. The tapered roller bearing with steep contact angle positioned between the two cylindrical roller bearings has two rows of rollers in a face-to-face arrangement and takes the axial load.

These "Kombi" bearings are employed as work roll bearings on four-high stands of both hot and cold rolling mills and of cold sheet rolling mills. Increased demands with respect to the quality and accuracy of the rolled product as well as further developments in the production process for sheet steel involving the introduction of contra-bending and axial displacement of the rolls have meant that work roll bearing loads have been considerably increased. This means that the four-row tapered roller fag bearings normally used as work roll bearings can often not meet the requisite life demands because of the much heavier radial and axial loads applied.

NSK Taper Roller Bearings can support high radial loads and axial loads in a single direction. Also available in two and four row versions which are capable of taking axial loads in either direction. These bearings can be supplied with high strength cages (optimised designs) and in a range of advanced special materials for arduous applications.NSK range of Taper Roller Bearings include: single row taper roller bearings, double row taper roller bearings, four row taper roller bearings, Molded-OilTM bearings, etc.

Tapered roller koyo bearings are generally used to support combined load mainly consisting of radial load.Their cups are separable for easy assembling.During mounting and using,radial clearance and axial clearance can be adjusted and preloaded mounting can be made.

BRING SKF RMS 20            (2 1/2 X 5 1/2 X 1 1/4) 
BRING SKF RMS 22            (2 3/4 X 6 1/4 X 1 3/8) 
BRING SKF RMS 28            (3 1/2 X 8 1/8 X 1 3/4) 

Contact Us

Add:Room Room#710-1 ,D Block ,Hi-Tech Information Square , Huayuan Industrial Park ,Nankai District ,Tianjin City ,China.

nsk information lists

Copyright © 2014 Tell Qi (Tianjin) International Trade Co., Ltd. All rights reserved. TEL:0086-022-83717568 FAX:0086-022-83717567 Email:taierqi@126.com